The SSV-3 Solvent Saver saves you time and money by discarding contaminated solvent and returning clean solvent to the reservoir. They are a very easy to use, low cost solvent recycler which has been designed and built in Australia to very high standards.
Mobile Phase containing 50% solvent costs about $8.00 per litre. Add to this preparation time and waste disposal costs and 2.5 litres of MP for a standard HPLC run costs around $35.00.
The SSV-3 Solvent Saver (Standard) can reduce these costs to just $10.70 per run. This translates to a saving of $5150 per year per HPLC!
The SSV-3 Solvent Saver also removes the need to make extra Mobile Phase for OOS investigations, and reduces instrument wear and damage to HPLC pumps, seals and pistons.
Multi-Lambda Scientific also manufactures a dual valve SSV-3. The SSV-3 Extended has features in addition to the SSV-3 Standard, which include:
- Programmable wash time (Flushed out destructive buffers / solvents at the end of a run
- "Pump Off" function (Switches the pump off after the wash)
Key Benefits:
- If you use less solvent during a run, you will need to buy less solvent.
- By using less solvent during a run, you save on Mobile Phase preparation time.
- If you generate less waste, you save on waste disposal costs, while benefiting the environment.
The SSV-3 is very simple to use and features a rate mode, which stops the system from running dry by compensating for detector drift. This feature is extremely valuable, especially for overnight runs.
Features:
- Single Valve Recycling for HPLC
- Backlit 32 Character LCD Display
- Validation Output
- Rate Mode
- External Override Feature
- 3m Teflon Tubing
- 3 x Valve Connectors
- 1 x 3-Way Solenoid Switching Valve (2 x 3-Way with SSV-3 Extended)
- 3 x pre-installed Solvent Resistant Tubing to valve adapters
- 1 x Operation Manual
Specifications:
Power: 10V AC @ 800 mA
Display: 32 Character LCD Display
Recycle Valve: 3 Port, Inert Liquid Interface
Analog Input: Selectable Ranges: 10mV / 1mV
Auto Zero: Manual or Remote
Dimensions: 260mm x 220mm x 110mm
Weight: 2 kilograms
For information on Solvent Savers, please 
